All docs

PI Planner

Updated

The PI Planner, under Tools, plans colonies: which of your characters runs a colony on which planet, what each makes, and what it earns at today's prices. Your running colonies, their problems and the changes that would earn more are on Planetary.

It has three tabs: Plans, Production Chains and Templates, and the colony designer. New to it? Using the PI Planner: a walkthrough takes you through it step by step. In every table, click a column heading to sort by it.

Plans

The Plans tab has three cards: Current setup, My plans and Suggested plans. Create New Plan is at the top right.

My plans lists your saved plans, the only plans you edit: active or draft, the characters, how many of the plan's planets are set up in EVE, what it plans a day today (and what it planned when saved), its Value made, and whether another setup for the same planets would earn more today. Active plans are listed first. Click a plan to open it. Set Active makes a plan the one VoidForge follows in its system; a system has one active plan, so the one before goes back to Draft. Make Draft stops following it.

Current setup

Current setup shows your colonies as EVE has them today, one row per system: the characters, what the colonies make, how many there are, their Value made a day, and the system's active plan with how it's doing against it. VoidForge reads it from EVE, so no plan ever changes or replaces it. Plan From This starts a new plan from those colonies.

Suggested plans

Suggested plans are plans VoidForge works out from your colonies, skills and today's prices: a better setup on the planets you run now, the best fit for your free planets, and the best plan from scratch in your systems. Each shows what it earns a day and how much more than your current setup, the biggest gain first; the ⓘ says why. Suggestions don't change and can't be edited: Plan From This makes a new plan of your own from one. A plan for your free planets opens with your current setup in it, kept as it is, since those planets are on top of what you run.

Starting a plan

Create New Plan starts a plan from scratch: pick a system and your characters, and every planet each character can run counts, whatever colonies they have now. Set Up in EVE says when a character has to remove colonies before building it. The arrow beside it has two more ways to start:

StartWhat it does
From a SystemSearch for any system, or choose one of yours, and plan there.
From a ProductChoose any P1 to P4 product to see which of your systems could make it, what it would earn a day and with how many planets. Plan It starts a plan for it there.

Plan From This on Current setup starts from the colonies you run, kept as they are, and on Suggested plans from a suggestion. Every Plan It in VoidForge (on Planetary's suggestions and By character, and on Production Chains) opens a new plan with its product chosen. Opening a plan from My plans edits it.

A plan in four steps

A plan takes you through four steps, one at a time, with Back and Next and a step bar at the top: Where and Who, Choose Products, How It Fits Together and Set Up in EVE. Planning PI in a system explains each step in full.

  • Where and Who: the system and its planets, the characters (every planet they can run, or free planets only), the prices, the customs tax and what to optimize for.
  • Choose Products: add products one at a time. The list then puts first what goes with them (products that use one of yours or share a P1 you make), then everything else that fits, then what no longer fits.
  • How It Fits Together: every product as one chain by tier, each factory step with its inputs needed against coming in. An active plan switches between Made (what EVE shows your colonies making) and Planned.
  • Set Up in EVE: each planet with its character, what it builds and whether EVE shows it built, with Copy Template and Edit Layout, then What changes in EVE.

From Choose Products on, This plan, Difference and Current setup sit under the step bar, so you see what the plan adds over what you run now as you build it. The header has Save Plan, and on a saved plan Save as New Plan, Set Active (or Make Draft), Rename and Delete.

Draft and Active

A plan stays a draft until you choose Set Active. A draft isn't compared with your colonies, doesn't count toward Against plan on Planetary, and doesn't send notifications. Once a plan is active, its planets are ticked off as EVE shows the colonies (usually within 20 minutes), its planned figure is recorded each day for Planetary's Income tab, and the alerts follow it. A system has one active plan. PI plan states explains each state and why it matters.

Notifications

There are four alerts for active plans, which you can set up in Settings › Notifications. Each is sent once a day for as long as it applies, to the bell, your browser and the Android app, and also appears in Needs attention. An alert about one colony opens its panel on Planetary.

AlertWhen it's sentThreshold
Product Below InputsA product you make sells for less than the P1 or P2 that goes into it.—
Better SetupAnother setup for the same planets and characters earns more than the plan, using no more extractor heads per colony.5%, 10%, 20% or 30% more
Behind PlanA colony earns less than its plan.10%, 15%, 25% or 50% behind
Factory IdleA factory stops because its inputs ran out.2, 6, 12 or 24 hours idle

In the Android app, you can turn each alert on or off in Settings; thresholds are set on the website.

Estimates, customs and taxes

  • Extraction amounts are estimates. EVE doesn't share planet scans, so a planned planet's daily amount is what's typical for the planet type, adjusted from your own extractor programs. You can edit amounts marked ≈: after you set an extractor program in EVE, enter the amount EVE shows and the plan updates.
  • Your colonies make only what they're fed. A plan's Value made counts each factory at what its inputs allow. See Planetary.
  • Customs tax is the rate you enter. Customs office owners set it, and EVE doesn't publish it. Import tax is charged at the same rate as export tax, on half the value.
  • Sales tax and broker fee come from the selling character's Accounting and Broker Relations skills. Buy orders pay no broker fee.

Production Chains

Production Chains is a recipe browser. Search for a system to see everything PI can make, with each product's price, what its inputs are worth and the margin between them. Resources says All here when the system's planets have every raw resource the product needs, or names the ones you'd bring in; All Resources Here lists only the products the system can make on its own. You make here shows what your colonies in the system make now.

Choose a product to see its chain by tier, from the planets with each resource to the market:

  • For 1 … Factory balances every step for one factory of the product: how many factories each step needs and the raw resources an hour (Robotics: 1 advanced factory, fed by 2 + 2 advanced, fed by 8 basic, from 48,000 raw resources an hour).
  • One Factory Each shows one factory of every step and what it needs an hour.
  • Click a step for its facts: a resource's planets in the system, or a factory's inputs, with Make a Layout to open Templates with the product chosen.

These are the recipe's own ratios. To fit the product to your planets and skills, and see what it would earn, choose Plan … in … in the chart's header.

Templates

In Make a layout, choose a product, a planet (or just a planet type) and a character, and VoidForge makes three layouts sized to the planet and the character's command center: Most output, Room for storage and Shortest links. Each shows what goes in and comes out an hour. For a P3, choose whether the P2 or the P1 is brought in. Open a layout to adjust it, or copy it straight into EVE.

Saved templates lists your templates and those shared with your corporations, with the planet type, what it makes and from what, and where it came from and who it's shared with. You can save one from a layout, from one of your colonies (Make from a colony), or from a template copied in EVE (Paste from EVE). Anyone in a corporation can use a template shared with it, but only you can change it.

The colony designer

The designer draws a colony to scale, with each structure's ring, its links and the routes moving along them. You can change the layout, see its CPU, power grid and what goes in and out, and copy it into EVE. Open it from a colony's panel on Planetary, a plan's Edit Layout, or a template. The colony designer explains it in full.

Copying to and from EVE

Choose Copy Template or Copy to EVE, then in EVE open the planet, choose Templates and paste. To bring a layout in from EVE, copy it as a template in EVE and paste it under Paste from EVE on Templates. See Copying to and from EVE.

Related

  • Using the PI Planner: a walkthrough: Step by step: see where your colonies stand on Planetary, make the changes in EVE, save a plan of them, follow it, and plan your free planets.
  • Planning PI in a system: A plan in four steps: where and who, choosing products one at a time, how they fit together, and setting them up in EVE, against your current setup.
  • The colony designer: Lay out a planetary colony to scale: structures and their rings, links and routes, CPU and power grid, then copy it into EVE as a template.
  • PI plan states: A PI Planner plan is unsaved, a draft or active. Only a system's active plan is followed: checked against your colonies, charted, and alerted on.
  • Planetary: Run your colonies: extractor timers and problems first, one change per colony, a colony's extractor, factories and storage, and output against your plans.
  • Notifications: Turn alerts on for finished jobs, extractors, structures, undercut orders, skill farms and PI plans, and use the notification bell.
Was this page helpful?